JOURNAL PAPERS
2024
112. Byambasuren Battulga, Muhammad F. Shaikh, Jae Wook Chun, Sung Bong Park, Sangwook Shim, Sang Bin Lee
IEEE Sensors Journal Early Access Article
111. Cheol-Hui Park, Marcos Orviz Zapico, Adrian Salcedo Bolanos, David Diaz Reigosa, Namhyuk Byun, Fernando Brizdel Blanco, Mohamed Osama, Sang Bin Lee
"Inverter-embedded DFIG Rotor Winding Insulation Testing for Wind Energy Applications"
IEEE Transactions on Industry Applications Early Access Article
110. Jongwon Kim, Sang Bin Lee
"Detection of High Resistance Contacts in the Electrical Distribution System during the Induction Motor Starting Transient"
IEEE Transactions on Energy Conversion Early Access Article
109. Byong Jo Hyon, Poo Reum Jang, Dongmyoun Joo, Yong-su Noh, Jun-Hyuk Choi, Sang Bin Lee
"Design of a Solid State Circuit Breaker Using a SiC MOSFET for LVDC Applications"
IEEE Access | Volume: 12, pp. 65278 - 65286
2023
108. Hyeon-Jun Lee, Jigyun Jeong, Marcos Orviz Zapico, Sang Bin Lee, David Diaz Reigosa, Fernando Briz del Blanco
"Airgap flux search coil-based estimation of permanent magnet temperature for thermal protection of PMSMs"
IEEE Transactions on Industry Applications | Volume: 60, Issue: 1, pp. 367 - 376, Jan - Feb. 2024
107. Muhammad Faizan Shaikh, Hyeonjun Lee, Byambasuren Battulga, Sang Bin Lee, Greg C Stone
"Detection Of Severe Ground Insulation Deterioration Before Failure in VFD-Fed Motors Using Off-line Common-Mode Voltage "
IEEE Transactions on Industry Applications | Volume: 60, Issue: 1, pp. 144 - 152, Jan - Feb. 2024
106. Muhammad Faizan Shaikh, Han-ju Kim, Namhyuk Byun, Sang Bin Lee, Kyeongyeol Kim, Taesik Kong, Baekkyung Ko, Kyunghoon Kim, Hyung-Il Park
"A Simple Offline Test for Detecting Rotor Faults in Wound Field Synchronous Machines"
IEEE Transactions on Energy Conversion | Volume: 38, Issue: 4, pp. 2980 - 2983, August 2023
105. Marcos Orviz, Diego F Laborda, David Reigosa, Hyeon-Jun Lee, Muhammad Saad Rafaq, Sang Bin Lee, Fernando Briz
IEEE Transactions on Industry Applications | Volume: 59, Issue: 4, pp. 4021 - 4034, July - Aug. 2023
104. Thotahage Sumadhurie Hansika, Muhammad Faizan Shaikh, Han-ju Kim, Sang Bin Lee, Marcos Orviz, Carlos A Platero
IEEE Transactions on Energy Conversion | Volume: 38, Issue: 3, pp. 2169 - 2178, September 2023
103. Cheolhui Park, Hyeonjun Lee, Marcos Orviz Zapico, Sang Bin Lee, David Diaz Reigosa, Fernando Briz del Blanco, Greg C Stone
IEEE Transactions on Industry Applications | Volume: 59, Issue: 4, pp. 3910 - 3919, July - Aug. 2023
102. Byambasuren Battulga, Muhamad Faizan Shaikh, Sang Bin Lee, Mohamed Osama
IEEE Transactions on Industry Applications | Volume: 59, Issue: 4, pp. 4454 - 4463, July - Aug. 2023
101. Jigyun Jeong, Hyeonjun Lee, Marcos Orviz, Sang Bin Lee, David Reigosa, Fernando Briz
IEEE Transactions on Industry Applications | Volume: 59, Issue: 3, pp. 3390 - 3399, May-June 2023
100. Pengfei Tian, Jose Manuel Guerrero, Carlos Antonio Platero, Sang Bin Lee, Konstantinos N Gyftakis, JA Antonino-Daviu
IEEE Transactions on Industry Applications | Volume: 59, Issue: 3, pp. 3175 - 3185, May-June 2023
99. Byambasuren Battulga, Muhamad Faizan Shaikh, Sang Bin Lee, Mohamed Osama
IEEE Transactions on Energy Conversion | Volume: 38, Issue: 1, pp. 646-652, March 2023
2022
98. Sang Bin Lee, Sungbong Park, Seongnam Kim, Sangwook Shim
IEEE Industrial Electronics Magazine | Volume: 16, Issue: 4, pp.40 - 43, December 2022
97. Han-Ju Kim, Juan de la Morena, Carlos A. Platero, Muhammad Faizan Shaikh, Thotahage Sumadhurie Hansika, Sang Bin Lee
IEEE Transactions on Energy Conversion | Volume: 37, Issue: 3, pp.2240 - 2243, September 2022
96. Hanju Kim, Muhammad Faizan Shaikh, Sang Bin Lee, Carlos Antonio Platero, Taehyung Kim
IEEE Transactions on Energy Conversion| Volume: 37, Issue: 3, pp.2009 - 2018, September 2022
95. Muhammad Faizan Shaikh, Jongsan Park, Yonghyun Park, Sang Bin Lee, Jose Antonino-Daviu
IEEE Transactions on Industry Applications | Volume: 58, Issue: 4, pp.4532 - 4541, July-Aug. 2022
94. Muhammad Saad Rafaq, Hyeonjun Lee, Yonghyun Park, Sang Bin Lee, Marcos Orviz Zapico, Daniel Fernandez, David Diaz-Reigosa, Fernando Briz
"Airgap Search Coil based Identification of PM Synchronous Motor Defects"
IEEE Transactions on Industrial Electronic | Volume: 69, Issue: 7, pp.6551 - 6560, July 2022
93. Muhammad Saad Saad Rafaq, Hyeonjun Lee, Yonghyun Park, Sang Bin Lee, Daniel Fernandez, David Diaz-Reigosa, Fernando Briz
IEEE Transactions on Industrial Electronic | Volume: 69, Issue: 6, pp.6441 - 6444, June 2022
92. Muhammad S. Rafaq, Muhammad Faizan Shaikh, Yonghyun Park, Sang Bin Lee
IEEE Transactions on Industrial Informatics | Volume: 18, Issue: 5, pp. 3276 - 3285, May 2022
91. Muhammad Faizan Shaikh, Hanju Kim, Sang Bin Lee, Chaewoong Lim
IEEE Transactions on Energy Conversion | Volume: 37, Issue: 1, pp.359 - 366, March 2022
90. Hyeon-Jun Lee, Hanju Kim, Jigyun Jeong, Kibok Lee, Sang Bin Lee, Greg C Stone
IEEE Transactions on Industry Applications | Volume: 58, Issue: 2, March-April 2022
2021
89. Muhammad Faizan Shaikh, Hanju Kim, Byambasuren Battulga, Sang Bin Lee
IEEE Transactions on Energy Conversion | vol. 36, no.4, pp.3582 - 3585, Dec. 2021
88. Sang-Bin Lee, Jaehoon Shin, Yonghyun Park, Heonyoung Kim, Jongwan Kim
IEEE Transactions on Industrial Electronics | vol.68, no.9, pp.7874-7883, Spet.2021
87. Suneel Kumar Kommuri, Yonghyun Park, Sang Bin Lee
"On-line Compensation of Mechanical Load Defects with Composite Control in PMSM Drives"
IEEE/ASME Transactions on Mechatronics | vol.26, no.3, pp.1392-1400, June.2021
86. Jaehoon Shin, Yonghyun Park, Sang Bin Lee
IEEE Transactions on Industry Applications | vol.57, no.3, pp.2471-2480, June.2021
2021 1st Prize Paper Award, Electrical Machines Committee, IEEE Industry Applications Society
85. Muhammad Faizan Shaikh, Jongsan Park, Sang Bin Lee
IEEE Transactions on Energy Conversion | Volume: 36, Issue: 2, pp.1262-1270, June. 2021
2020
84. Sang Bin Lee, Greg C. Stone, Jose Antonino-Daviu, Konstantinos N. Gyftakis, Elias G. Strangas, Pascal Maussion, Carlos A. Platero
"Condition Monitoring of Industrial Electric Machines: State of the Art and Future Challenges"
IEEE Industrial Electronics Magazine | Volume: 14, Issue: 4, Dec. 2020
83. Yonghyun Park, Hanchun Choi, Jaehoon Shin, JongSan Park, Sang Bin Lee, Hyunsik Jo
IEEE Transactions on Industrial Electronics | vol.67, no.12, pp.10075-10084, Dec. 2020.
82. Yonghyun Park, Hanchun Choi, Sang Bin Lee, Konstantinos N. Gyftakis
"Search Coil-based Detection of Non-adjacent Rotor Bar Damage in Squirrel Cage Induction Motors"
IEEE Transactions on Industry Applications | vol.56, no.5, pp.4748-4757, Oct.2020
81. Konstantinos N. Gyftakis ; Panagiotis A. Panagiotou ; Sang Bin Lee
"Generation of Mechanical Frequency Related Harmonics in the Stray Flux Spectra of Induction Motors Suffering from Rotor Electrical Faults"
IEEE Transactions on Industry Applications | vol.56, no.5, pp.4796-4803, June.2020
80. S.K. Kommuri, Y. Park, S.B. Lee
"High-Resistance Fault-Control in Permanent Magnet Synchronous Motors,"
IEEE/ASME Transactions on Mechatronics | vol.25, no. 1,pp.271-281, Feb. 2020.
79. Yonghyun Park, Sang Bin Lee, Jangho Yun, Mladen Sasic, Greg C. Stone
"Air Gap Flux-Based Detection and Classification of Damper Bar and Field Winding Faults in Salient Pole Synchronous Motors"
IEEE Transactions on Industry Applications | vol.56, no.4, pp.3506-3615, Mar.2020
2020 1st Prize Paper Award, Electrical Machines Committee, IEEE Industry Applications Society
78. Sang Bin Lee, Alireza Naeini, Shesha Jayaram, Greg C. Stone, Mladen Sasic
"Surge Test-based Identification of Stator Insulation Component with PD Activity for Low Voltage AC Motors"
IEEE Transactions on Industry Applications | vol.56, no.3, pp.2541-2549, Feb.2020
77. Jose Antonino-Daviu, Vicente Fuster-Roig, Sanguk Park, Yonghyun Park, Hanchun Choi, Jongsan Park, Sang Bin Lee
"Electrical Monitoring of Damper Bar Condition in Salient Pole Synchronous Motors without Motor Disassembly"
IEEE Transactions on Industry Applications | Vol.26, no.2, pp.1423-1431, Feb,2020
2019 SDEMPED Prize Paper Award, Technical Committee on Diagnostics, IEEE Power Electronics Society
2019
76. C. Yang, S.B. Lee, Geunik Jang, Seongnam Kim, Gyukyung Jung, Junghoon Lee, Sangwook Shim, Young Kab Lim, Jinpyo Kim, S. Park
"Starting Current Analysis in Medium Voltage Induction Motors: Detecting Rotor Faults and Reactor Starting Defects ,"
IEEE Industry Applications Magazine, vol. 25, no. 6, pp. 69-79, Nov/Dec 2019.
75. Y. Park, C. Yang, J. Kim, H. Kim, S.B. Lee, K.N. Gyftakis, P. Panagiotou, S.H. Kia, G. Capolino
"Stray Flux Monitoring for Reliable Detection of Rotor Faults under the Influence of Rotor Axial Air Ducts ,"
IEEE Transactions on Industrial Electronics, vol.66, no.10, pp. 7561-7570, Oct 2019.
74. Jangho Yun, Sang Bin Lee, Mladen Šaši´c, and Greg C. Stone
"Reliable Flux-Based Detection of Field Winding Failures for Salient Pole Synchronous Generators ,"
IEEE Transactions on Energy Conversion, vol. 34, no. 3, pp. 1715-1718, Sep 2019.
73. Jangho Yun, Sanguk Par, Chanseung Yang, Yonghyun Park, Sang Bin Lee, Mladen Šaši´c, and Greg C. Stone
"Comprehensive Monitoring of Field Winding Short Circuits for Salient Pole Synchronous Motors ,"
IEEE Transactions on Energy Conversion, vol. 34, no. 3, pp. 1686-1694, Sep 2019.
72. J. Yun, S. Park, C. Yang, S.B. Lee, J. Antonino-Daviu, M. Sasic, Greg C. Stone
"Airgap Search Coil-based Detection of Damper Bar Failures in Salient Pole Synchronous Motors ,"
IEEE Transactions on Industry Applications , vol.66, no.10, pp. 3640-3648, July/Aug 2019.
71. D. Reigosa, D. Fernandez, M. Martinez, Y. Park, S.B. Lee, F. Briz
"Permanent Magnet Synchronous Machine Non-Uniform Demagnetization Detection Using Zero-Sequence Magnetic Field Density, "
IEEE Transactions on Industry Applications, vol. 55, no. 4, pp. 14-24, July/Aug 2019.
70. Y. Park, C. Yang, S.B. Lee, D. Lee, D. Fernandez, D. Reigns, F. Briz
"Online Detection and Classification of Rotor and Load Defects in PMSMs Based on Hall Sensor Measurements, "
IEEE Transactions on Industry Applications, vol. 54, no. 4, pp. 3803 - 3812, July/Aug 2019.
69. Y. Park, D. Fernandez, S.B. Lee, D. Hyun, M. Jeong, S.K. Kommuri, C. Cho, D. Reigosa, F. Briz
"Online Detection of Rotor Eccentricity and Demagnetization Faults in PMSMs Based on Hall-Effect Field Sensor Measurements ,"
IEEE Transactions on Industry Applications , vol.55, no.3, pp. 2499-2509, May/June 2019.
2018
68. D. Choi, T. Kang, S.B. Lee, J. Kim, J. Kim
"Stator Insulation Testing for Appliance Motors with Aluminum Windings: Applying Solutions to Root Causes of Failure ,"
IEEE Industry Applications Magazine, vol. 24, no. 6, pp. 14-24, Nov/Dec 2018.
67. J. Yun, S.B. Lee
"Influence of Aluminum Die-Cast Rotor Porosity on the Efficiency of Induction Machines ,"
IEEE Transactions on Magnetics, vol.54, no.11, (article sequence number: 8104905) Nov 2018.
66. D. Reigosa, D. Fernández, Y. Park, A.B. Diez, S.B. Lee, F. Briz
"Detection of Demagnetization in Permanent Magnet Synchronous Machines Using Hall-Effect Sensors ,"
IEEE Transactions on Industry Applications, vol. 54, no. 4, pp. 3338-3349, July/Aug 2018.
63. H. Kim, T. Kong, S.B. Lee, T. Kang, N. Oh, Y. Kim, S. Park, C. Lim, G.C. Stone
“Experience With Stator Insulation Testing and Turn/Phase Insulation Failures in the Power Generation Industry ,”
IEEE Transactions on Industry Applications vol. 54, no. 3, pp. 2225-2236, May/June 2018.
2017 SDEMPED Prize Paper Award, Technical Committee on Diagnostics, IEEE Power Electronics Society
65. T. Kang, C. Yang, Y. Park, D. Hyun, S.B. Lee, M. Teska
"Electrical Monitoring of Mechanical Defects in Induction Motor-Driven V-Belt–Pulley Speed Reduction Couplings ,"
IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2255-2264, May/June 2018.
64. M. Jeong, J. Yun, Y. Park, S.B. Lee, K. N. Gyftakis
"Quality Assurance Testing for Screening Defective Aluminum Die-Cast Rotors of Squirrel Cage Induction Machines ,"
IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2246-2254, May/June 2018.
62. D. Reigosa, D. Fernandez, C. González, S.B. Lee, F. Briz
"Permanent Magnet Synchronous Machine Drive Control Using Analog Hall-Effect Sensors ,"
IEEE Transactions on Industry Applications, vol. 54, no. 3, pp.2358-2369, May/June 2018.
61. J. Yun; S. Lee; M. Jeong; S. B. Lee
"Influence of Die-Cast Rotor Fill Factor on the Starting Performance of Induction Machines, "
IEEE Transactions on Magnetics, vol. 54, no. 3, Mar 2018.
60. S.K. Kommuri, S.B. Lee, K.C. Veluvolu
"Robust Sensors-Fault-Tolerance With Sliding Mode Estimation and Control for PMSM Drives,"
IEEE/ASME Transactions on Mechatronics, vol. 23, no. 1, pp.17- 28, Feb 2018.
2017
59. D. Fernandez; D. Hyun; Y. Park; D.-D. Reigosa; S. B. Lee; D.-M. Lee; F. Briz
"Permanent Magnet Temperature Estimation in PM Synchronous Motors Using Low-Cost Hall Effect Sensors,"
IEEE Transactions on Industry Applications, vol. 53, no. 5, pp. 4515-4525, Sept/Oct 2017.
2017 1st Prize Paper Award, Industrial Drives Committee, IEEE Industry Applications Society
58. J. Jung, Y. Park, S.B. Lee, C.Cho, K. Kim, E.J.Wiedenbrug, M. Teska
“Monitoring Journal-Bearing Faults: Making Use of Motor Current Signature Analysis for Induction Motors,”
IEEE Industry Applications Magazine, vol. 23, no. 4, pp. 300-307, July-Aug, 2017.
57. J. Yun, S.B. Lee,
“Simplified Approach for Predicting the Starting Performance of Induction Machines based on Rotor Design Modification,”
IEEE Transactions on Magnetics, vol. 53, no. 6, June 2017.
56. J. Antonino-Daviu; S.B. Lee; Elias G. Strangas
"Guest Editorial Special Section on Advanced Signal and Image Processing Techniques for Electric machines and Drives Fault Diagnosis and Prognosis,"
IEEE Transactions on Industrial Informatics, vol. 13, no. 3, pp. 1257-1260, June 2017.
55. Y. Park, M. Jeong, S.B. Lee, J.A. Antonino-Daviu, M. Teska,
“Influence of Blade Pass Frequency Vibrations on MCSA-based Rotor Fault Detection of Induction Motors,”
IEEE Transactions on Industry Applications, vol. 53, no. 3, pp. 2049-2058, May/June 2017.
54. M. Drif, S.B. Lee, H. Kim, J. Kim, A. J. M. Cardoso,
“Active and Reactive Power Spectra-based Detection and Separation of Rotor Faults and Low Frequency Load Torque Oscillations ,”
IEEE Transactions on Industry Applications vol. 53 , no. 3, pp. 2702-2710, May/June 2017.
2016
53. S.B. Lee, J. Jung, Y. Park,
“Discussion of “Oil-Whirl Fault Modeling, Simulation, and Detection in Sleeve Bearings of Squirrel Cage Induction Motors,”
IEEE Transactions on Energy Conversion, vol. 31, no. 4, pp. 1700-1700, Dec, 2016
52. J. Jung, S.B. Lee, C. Lim, C. Cho, K. Kim,
“Electrical Monitoring of Mechanical Looseness for Induction Motors With Sleeve Bearings,”
IEEE Transactions on Energy Conversion, vol. 31, no. 4, pp. 1377-1386, Dec, 2016.
51. J. Antonino-Daviu, J. Pons-Llinares, S.B. Lee,
“Advanced Rotor Fault Diagnosis for Medium-Voltage Induction Motors Via Continuous Transforms,”
IEEE Transactions on Industry Applications, vol. 52, no. 5, pp. 4503-4509, Sept/Oct, 2016.
50. D. Choi, T.-J. Kang, S.B. Lee, J. Kim, J. Kim
“Stator Insulation Quality Assurance Testing for Appliance Motors with Aluminum Windings,”
IEEE Industry Applications Magazine, vol. 24, no. , pp. 1-8, Sep, 2016.
49. S. Han, S.B. Lee, J. Jung, K. Lee, S. Nandi, B. Kim, B. Kang,
“In-Service Monitoring of Stator-Slot Magnetic Wedge Condition for Induction Motors,”
IEEE Transactions on Industry Applications, vol. 52, no. 4, pp. 2900-2910, July/August, 2016.
48. H. Kim, S.B. Lee, S. Park, S. H. Kia, G. A. Capolino,
“Reliable Detection of Rotor Faults Under the Influence of Low-Frequency Load Torque Oscillations for Applications With Speed Reduction Couplings,”
IEEE Transactions on Industry Applications, vol. 52, no. 2, pp. 1460-1468, March/April, 2016.
47. S.B. Lee, D. Hyun, T. Kang, C. Yang, S. Shin; H. Kim, S. Park, T. Kong, H. Kim,
"Identification of False Rotor Fault Indications Produced by Online MCSA for Medium-Voltage Induction Machines,"
IEEE Transactions on Industry Applications, vol. 52, no. 1, pp. 729-739, Jan/Feb, 2016.
2015 1st Place Technical Paper Award, Pulp and Paper Industry Committee, IEEE Industry Applications Society
2015
46. J. Kim, S. Shin, S.B. Lee, K. Gyftakis, M. Drif, A. J. M. Cardoso,
“Power spectrum-based detection of induction motor rotor faults for immunity to false alarms,”
IEEE Transactions on Energy Conversion, vol. 30, no. 3, pp. 1123-1132, Sept, 2015.
45. M. Mengoni, L. Zarri, Y. Gritli, A. Tani, F. Filippetti, S.B. Lee
"Online Detection of High-Resistance Connections With Negative-Sequence Regulators in Three-Phase Induction Motor Drives,"
IEEE Transactions on Industry Applications, vol. 51, no. 2, pp. 1579-1586, Mar/April 2015.
44. T. Kang, J. Kim, S.B. Lee, and C. Yung,
"Experimental Evaluation of Low-Voltage Offline Testing for Induction Motor Rotor Fault Diagnostics,"
IEEE Transactions on Industry Applications, vol. 51, no. 2, pp.1375-1384 , Mar/April 2015.
2014 2nd Place Technical Paper Award, Pulp and Paper Industry Technical Committee, IEEE Industry Applications Society
43. J. Pons-Llinares, J. Antonino-Daviu, M. Riera-Guasp, S.B. Lee, T-J. Kang and C. Yang,
“Advanced Induction Motor Rotor Fault Diagnosis Via Continuous and Discrete Time-Frequency Tools,"
IEEE Transactions on Industrial Electronics, vol. 62, no. , pp. - , March, 2015.
42. C. Yang, T. Kang, S.B. Lee, J. Yoo, A. Bellini, L. Zarri, and F. Filippetti
“Screening of False Induction Motor Fault Alarms Produced by Axial Air Ducts based on the Space Harmonic-Induced Current Components,”
IEEE Transactions on Industrial Electronics, vol. 62, no.3 , pp.1803-1813 , March 2015.
2014
41. S. Shin, J. Kim, S.B. Lee, C. Lim, and E. J. Wiedenbrug,
“Evaluation of the influence of rotor magnetic anisotropy on condition monitoring of 2 pole induction motors,”
IEEE Transactions on Industry Applications, vol. 51, no. 4, pp. 2896-2904 , Sept 2014.
40. C. Yang, T. Kang, D. Hyun, S.B. Lee, J. Antonino-Daviu, and J. Pons-Llinares,
“Reliable Detection of Induction Motor Rotor Faults under the Rotor Axial Air Duct Influence,”
IEEE Transactions on Industry Applications, vol. 50, no. 4, pp. 2493-2502, July/Aug 2014.
2013 2nd Prize Paper Award, Electric Machines Committee, IEEE Industry Applications Society
39. K.W. Lee, J. Hong, D. Hyun, S.B. Lee, E.J Wiedenbrug, M. Teska, and C. Lim,
“Detection of Stator-Slot Magnetic Wedge Failures for Induction Motors Without Disassembly,”
IEEE Transactions on Industry Applications, vol. 50, no. 4, 2410-2419, July/Aug 2014.
2014 IEEE Transactions on Industry Applications Prize Paper Award(Honorable Mention), IEEE Industry Applications Society
38. Y. Gritli, S.B. Lee, F. Filippetti, and L. Zarri,
“Advanced Diagnosis of Outer Cage Damage in Double Squirrel Cage Induction Motors under Time-varying Condition based on Wavelet Analysis,”
IEEE Transactions on Industry Applications, vol. 50, no. 3, pp. 1791-1800, May/June 2014.
37. C. Kral, A. Haumer, and S.B. Lee,
“A Practical Thermal Model for the Estimation of Permanent Magnet and Stator Winding Temperatures,”
IEEE Transactions on Power Electronics, vol. 29, no. 1, pp. 455-464, Jan. 2014.
2013
36. J. Hong, D. Hyun, S.B. Lee, and C. Kral,
IEEE Transactions on Industry Applications, vol. 49, no. 6, pp. 2533-2542, Nov./Dec. 2013.
35. S. Lee, J. Hong, S.B. Lee, E. Wiedenbrug, M. Teska, and H. Kim,
“Evaluation of the Influence of Rotor Axial Air Duct Design on Condition Monitoring of Induction Motors,”
IEEE Transactions on Industry Applications, vol. 49, no. 5, pp. 2024-2033, Sept./Oct. 2013.
34. T. Kang, J. Hong, S.B. Lee, Y. Yoon, D. Hwang, and D. Kang,
"The Influence of the Rotor on Surge PD Testing of Low Voltage AC Motor Stator Windings ,"
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, no. 3, pp. 762-769, June 2013.
2012
33. J. Antonino-Daviu, M. Riera-Guasp, J. Pons-Llinares, J. Park, S.B. Lee, J. Yoo and C. Kral,
“Detection of Broken Outer-Cage Bars for Double-Cage Induction Motors under the Startup Transient,”
IEEE Transactions on Industry Applications, vol. 48, no. 5, pp.1539-1548, Sept./Oct. 2012.
2011 SDEMPED Prize Paper Award, Technical Committee on Diagnostics, IEEE Power Electronics Society
32. D. Hyun, S. Lee, J. Hong, S.B. Lee, S. Nandi,
"Detection of Airgap Eccentricity for Induction Motors using the Single-Phase Rotation Test,"
IEEE Transactions on Energy Conversion, vol. 27, no. 3, pp. 689-696, Sept. 2012.
31. J. Hong, S.B. Lee, C. Kral, and A. Haumer,
“Detection and Classification of Rotor Demagnetization and Eccentricity Faults for PM Synchronous Motors,”
IEEE Transactions on Industry Applications, vol. 48, no. 3, pp. 923-932, May/June 2012.
2011 1st Prize Paper Award, Electric Machines Committee, IEEE Industry Applications Society
30. J. Hong, S.B. Lee, C. Kral, and A. Haumer,
“Detection of Airgap Eccentricity for Permanent Magnet Synchronous Motors based on the d-axis Inductance,”
IEEE Transactions on Power Electronics, vol. 27, no.5, pp.2605-2612, May 2012.
29. J. Yang, T. Kang, B. Kim, S.B. Lee, Y. Yoon, D. Kang, J. Cho, H. Kim,
“Experimental Evaluation of Using the Surge PD Test as a Predictive Maintenance Tool for Monitoring Turn Insulation Quality in Random Wound AC Motor Stator Windings,”
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 19, no. 1, pp. 53-60, Feb. 2012.
2011
28. D. Hyun, J. Hong, S.B. Lee, K. Kim, E.J. Wiedenbrug, M. Teska, S. Nandi, I.T. Chelvan,
“Automated Monitoring of Airgap Eccentricity for Inverter-Fed Induction Motors Under Standstill Conditions,”
IEEE Transactions on Industry Applications, vol. 47, no. 3, pp. 1257-1266, May/June. 2011.
27. S. Nandi, T.C. Ilamparithi, S.B. Lee, and D. Hyun,
“Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters,"
IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1673-1683, May. 2011.
26. S.B. Lee, J. Yang, J. Hong, B. Kim, J. Yoo, K. Lee, J. Yun, M. Kim, K. Lee, E.J. Wiedenbrug, and S. Nandi,
"A New Strategy for Condition Monitoring of Adjustable Speed Induction Machine Drive Systems,"
IEEE Transactions on Power Electronics, vol. 26, no. 2, pp. 389-398, Feb. 2011.
2009 SDEMPED Prize Paper Award, Technical Committee on Diagnostics, IEEE Power Electronics Society
25. B. Kim, J. Yang, K. Lee, S.B. Lee, E.J. Wiedenbrug, and M.R. Shah,
"Automated Detection of Rotor Faults for Inverter-Fed Induction Machines under Standstill Conditions,"
IEEE Transactions on Industry Applications, vol. 47, no. 1, pp. 55-64, Jan./Feb. 2011.
2010
24. K. Lee, J. Hong, S.B. Lee, and S. Lee,
“Quality Assurance Testing for Magnetization Quality Assessment of BLDC Motors used in Compressors,”
IEEE Transactions on Industry Applications, vol. 46, no. 6, pp. 2452-2458, Nov./Dec. 2010.
23. J. Hong, D. Hyun, S.B. Lee, J. Yoo, and K. Lee,
“Automated Monitoring of Magnet Quality for Permanent-Magnet Synchronous Motors at Standstill,"
IEEE Transactions on Industry Applications, vol. 46, no. 4, pp. 1397-1405, July/Aug. 2010.
22. K. Lee, J. Hong, K. Lee, S.B. Lee, and E.J. Wiedenbrug,
“A Stator-Core Quality-Assessment Technique for Inverter-Fed Induction Machines,”
IEEE Transactions on Industry Applications, vol. 46, no. 1, pp. 213-221, Jan./Feb.2010.
2008 2nd Prize Paper Award, Electric Machines Committee, IEEE Industry Applications Society
2009
21. M.R. Shah, and S.B. Lee,
“Optimization of Shield Thickness of Finite Length Solid Rotors for Eddy Current Loss Minimization,”
IEEE Transactions on Industry Applications, vol. 45, no. 6, pp. 1947-1953, Nov./Dec.2009.
20. J. Yun, J. Cho, S.B. Lee, and J. Yoo,
“Online Detection of High-Resistance Connections in the Incoming Electrical Circuit for Induction Motors,”
IEEE Transactions on Industry Applications, vol. 45, no. 2, pp. 694-702, Mar./Apr. 2009.
19. J. Yun, K. Lee, K. Lee, S.B. Lee, J. Yoo,
“Detection and Classification of Stator Turn Faults and High-Resistance Electrical Connections for Induction Machines,”
IEEE Transactions on Industry Applications, vol. 45, no. 2, pp. 666-675, Mar./Apr. 2009.
2008
18. K. Lee, M. Kim, J. Yoon, S.B. Lee, and J. Yoo,
“Condition Monitoring of DC Link Electrolytic Capacitors in Adjustable-Speed Drives,”
IEEE Transactions on Industry Applications, vol. 44, no. 5, pp. 1606-1613, Sept./Oct. 2008.
17. J. Yang, J. Cho, S.B. Lee, J. Yoo, and H. Kim,
“An Advanced Stator Winding Insulation Quality Assessment Technique for Inverter-Fed Machines,”
IEEE Transactions on Industry Applications, vol. 44, no. 2, pp. 555-564, March/April, 2008.
16. Y. Park, J. Yoo, and S.B. Lee,
“Practical Implementation of PWM Synchronization and Phase-Shift Method for Cascaded H-Bridge Multilevel Inverters based on a Standard Serial Communication Protocol,”
IEEE Transactions on Industry Applications, vol. 44, no. 2, pp. 634-643, March/April, 2008.
2007
15. J. Yang, S.B. Lee, J. Yoo, S. Lee, Y. Oh, C. Choi,
“A Stator Winding Insulation Condition Monitoring Technique for Inverter-fed Machines,”
IEEE Transactions on Power Electronics, vol. 22, no. 5, pp. 2026-2033, Sept. 2007.
14. R.M. Tallam, S.B. Lee, G.C. Stone, J.Y. Yoo, G.B. Kliman, T.G. Habetler, and R.G. Harley,
“A Survey of Methods for Detection of Stator Related Faults in Induction Machines,”
IEEE Transactions on Industry Applications, vol. 43, no. 4, pp. 920-933, July/August 2007.
2006
13. S.B. Lee, J. Yang, K. Younsi, and R.M Bharadwaj,
“An Online Groundwall and Phase-to-Phase Insulation Quality Assessment Technique for AC Machine Stator Windings,”
IEEE Transactions on Industry Applications, vol. 42, no. 4, pp. 946-957, July/Aug., 2006.
2006 1st Prize Paper Award, Electric Machines Committee, IEEE Industry Applications Society
12. M.R. Shah, and S.B. Lee,
“Rapid Analytical Optimization of Eddy Current Shield Thickness for Associated Loss Minimization in Electrical Machines,”
IEEE Transactions on Industry Applications, vol. 42, no. 3, pp. 642-649, May/June, 2006.
11. S.B. Lee, G.B. Kliman, M.R. Shah, D.W. Kim, W.T. Mall, N.K. Nair, and R.M. Lusted,
“Experimental Study of Inter-laminar Core Fault Detection Techniques based on Low Flux Core Excitation,”
IEEE Transactions on Energy Conversion, vol. 21, no. 1, pp. 85-94, Mar. 2006.
2004
7. G.B. Kliman, S.B. Lee, M.R. Shah, N.K. Nair, and R.M. Lusted,
“A New Method for Synchronous Generator Core Quality Evaluation,”
IEEE Transactions on Energy Conversion, vol. 19, no. 3, pp. 576-582, Sept. 2004.
2005 IEEE PES Prize Paper Award, IEEE Power Engineering Society
6. J.M. Aller, T.G. Habetler, R.G. Harley, R.M. Tallam, and S.B. Lee,
“Corrections to “Sensorless Speed Measurement of AC Machines using Analytic Wavelet Transform”,”
IEEE Transactions on Industry Applications, vol. 40, no. 1, pp. 202, Jan./Feb. 2004.
2003
5. S.B. Lee, and T.G. Habetler,
“A Remote and Sensorless Thermal Protection Scheme for Small Line-connected AC Machines,”
IEEE Transactions on Industry Applications, vol. 39, no. 5, pp. 1323-1332, Sept./Oct. 2003.
4. S.B. Lee, and T.G. Habetler,
“An Online Stator Winding Resistance Estimation Technique for Temperature Monitoring of Line-connected Induction Machines,”
IEEE Transactions on Industry Applications, vol. 39, no. 3, pp. 685-694, May/June 2003.
2002 2nd Prize Paper Award, Electric Machines Committee, IEEE Industry Applications Society
3. S.B. Lee, R.M. Tallam, and T.G. Habetler,
“A Robust, On-line Turn Fault Detection Technique for Induction Machines based on Monitoring the Sequence Component Impedance Matrix,”
IEEE Transactions on Power Electronics, vol. 18, no. 3, pp. 865-872, May 2003.
2002
2. J.M. Aller, T.G. Habetler, R.G. Harley, R.M. Tallam, and S.B. Lee,
“Sensorless Speed Measurement of AC Machines using Analytic Wavelet Transform,”
IEEE Transactions on Industry Applications, vol. 38, no. 5, pp. 1344 –1350, Sept./Oct. 2002.
1. S.B. Lee, T.G. Habetler, R.G. Harley, and D.J. Gritter,
“An Evaluation of Model-based Stator Resistance Estimation for Induction Motor Stator Winding Temperature Monitoring,”
IEEE Transactions on Energy Conversion, vol. 17, no. 1, pp. 7-15, Mar 2002.